[StrongED] Paste wierdness

[David Pitt <pittdj@xxxxxxxxxxxx>]

I seem to have found something a bit odd.

On the Raspberry Pi 3 copying two *commands from ROOL's forum in NetSurf to
StrongEd 4.70a12 resulted in a crash.

*where
Address &FC1600F0 is at offset &000165E8 in module 'WindowManager'
*showregs
Register dump (stored at &2001A810) is:
R0  = 0000000E R1  = 0009C000 R2  = 0009C000 R3  = 00003988
R4  = 00003980 R5  = 00003988 R6  = 20418AB8 R7  = 20418298
R8  = FFFFFFFF R9  = 20427DE4 R10 = 00000026 R11 = 20000000
R12 = 2001DE94 R13 = FA207FB0 R14 = FC160038 R15 = FC1600F0
Mode SVC32 flags set: NzCvqjggggeAift        PSR = A0000113
*

The two commands were :-

*vcgencmd get_config int
*vcgencmd get_config str

Selecting both and copying to StrongED in one drag or one menu driven copy
and paste crashed. Copying the commands individually is OK, as are other
multiple copies and pastes.

Copying the two commands together into a BaseMode view and then together in
a TaskWindow does not crash.

StrongED 4.69 is OK and does not crash at all.

A StrongDump is at http://pittdj.co.uk/temp/SEpaste.zip 

A test is set up in the 'Tests' section of ROOL's forum :-

https://www.riscosopen.org/forum/forums/6/topics/9739

-- 
David Pitt

-- 
To unsubscribe send a mail to StrongED+unsubscribe@xxxxxxxxxxx
List archives at http://diy.Torrens.org/RO/StrongED/index.html