Re: [StrongED] Re: StrongEd v4.70a11 and Throwback

[Fred Graute <fjgraute@xxxxxxxxx>]

In message <5614f1dcc0list01@xxxxxxxxxxxxxxxx>
          Martin <list01@xxxxxxxxxxxxxxxx> wrote:

> In article <5614a98afblist01@xxxxxxxxxxxxxxxx>,
>    Martin <list01@xxxxxxxxxxxxxxxx> wrote:
> > In article <c9369e1456.fjgraute@xxxxxxxxx>,
> >    Fred Graute <fjgraute@xxxxxxxxx> wrote:
> 
> > > TextSeek 1.47 and StrongED 4.70a12 work fine here. 
> 
> > Not always for me, using TS v1.47 & SE v4.70a11.
> 
> But I have just done a fresh install of both on a RPi and throwback works
> a treat! The big visible difference is that the lines are highlit when
> the mouse is over them, and they are not on my Iyonix.

My Iyonix no longer works so I cannot test on it anymore. Are there
others out there with an Iyonix and TS v1.47 & SE v4.70a11 that could
test this? It would be helpful to know if it's just Martin that has this
problem or if other users are affected too.

> So, my challenge now is to find what I have installed, or changed in SE
> Choices, that could affect it.

You could copy the setup from the RPi to the Iyonix and see if that
works. If it does then there's a problem with the Iyonix installation.
If it doesn't then something stops StrongED's throwback from working on
the Iyonix.

The easiest way to do this is to copy StrongED and StrED_cfg from the
RPi to the same directory on the Iyonix. Quit StrongED, if running, then
start the copied StrongED with Ctrl held down (forces it to use the
local StrED_cfg).

Cheers,
Fred.

-- 
StrongED Developer
http://www.stronged.iconbar.com/

--=20
To unsubscribe send a mail to StrongED+unsubscribe@xxxxxxxxxxxxxx
List archives at http://www.Torrens.org.uk/RO/StrongED/index.html