[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [StrongED] Occasional crash with StrongMen

In message <a825186f54.pnyoung@xxxxxxxxxxxxxxxxxxxx>
          Peter Young <pnyoung@xxxxxxxxxxxx> wrote:

> On 29 Nov 2014  Fred Graute <fjgraute@xxxxxxxxx> wrote:

[Occasional StrongMen aborts on Menu click at left edge of screen]

> > If it is 1.27b3 then next time the abort happens could please you do a
> > *ShowRegs in a TaskWindow and send me the output. It might yield some
> > clues as to what the cause is.
> Alas, it happened again yesterday evening with 1.27 b3
> 30 Nov 22:34:27 000 80000002: Error from (unknown): Internal error:
> abort on data transfer at &0000A320
> *showregs
> Register dump (stored at &2000AE30) is:
> R0  = 0001F73C R1  = 00237C40 R2  = 01909BDB R3  = 205984A4
> R4  = 00000800 R5  = 00000010 R6  = 00000002 R7  = 0001F73C
> R8  = 01909BDB R9  = 00237C40 R10 = FA208000 R11 = FA207F5C
> R12 = 0000DE28 R13 = 0000F2E0 R14 = 0000B744 R15 = 0000A320
> Mode USR32 flags set: nzcvqjggggeAift        PSR = 00000110

Thanks, that very useful. It's aborting on the address in r0 which
should point to the start of the loaded StrongMenu file. The address
does look a bit too big, my StrongMenu file is loaded at about &18800.

It may be that your StrongMenu file is much bigger leading to a larger
menu (which stored below the StrongMenu file) causing the address to be
bigger. So question is; How large is your StrongMenu file?

The address may get corrupted but I can't see anything obvious in the
source. Without a reproducible case to work out where the corruption
comes from it's going to be difficult to fix this.


StrongED Developer

To unsubscribe send a mail to StrongED+unsubscribe@xxxxxxxxxxxxxx
List archives at http://www.Torrens.org.uk/RO/StrongED/index.html