[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [StrongED] StrongED 4.69b6 available

On 1 Aug 2013  Fred Graute <fjgraute@xxxxxxxxx> wrote:


> If you could try the following that would be very helpful:

Got a bit more time than I had thought in my off-list message to Fred 
yesterday, and have done it all.

> After running StrongED and StrongHelp, grab the StrongHelp module with
> StrongED: Click Adjust over the iconbar icon, and select Dump mode. In
> the window that pops up click on 'RAM Module' and select StrongHelp from
> the menu. Note of the first address in the top left of the window.

Not sure which of these is the address, but the first line of the dump 
starts 7514 : 00001878. Please forgive my ignorance!

> Now search the manual to trigger the abort. Note the abort address too.

02 Aug 08:56:04 000 80000002: Error from StrongHelp: Internal error: 
abort on data transfer at &20791104

> Open a TaskWindow and enter 'ShowRegs'. Let me know the two addresses
> and the output of ShowRegs. Hopefully that'll allow me to fix this.

Register dump (stored at &2000AE30) is:
R0  = 24524944 R1  = 0003096C R2  = 45455246 R3  = 24524944
R4  = 41544144 R5  = 00000004 R6  = 0000AC00 R7  = 0002096C
R8  = 00021E1D R9  = 00021EC9 R10 = 0000AD80 R11 = 000000AC
R12 = 20794D3C R13 = 20796238 R14 = 0000AC00 R15 = 20791104
Mode USR32 flags set: nZCvqjggggeAift        PSR = 60000110

I hope this all helps.


> 'Nearest' attempts to align the cursor to the nearest start of a 'word'
> on the first non-empty line above or below. This may sound difficult
> but it's actually quite simple.

Many thanks for the explanation.

With best wishes,


Peter Young (zfc W) and family
Prestbury, Cheltenham, Glos. GL52, England

To unsubscribe send a mail to StrongED+unsubscribe@xxxxxxxxxxxxxx